Howdy

DTF Hot Peel Transfer

This is not a shirt, just a transfer. You must use a heat press, a house iron or easy press will not work. 

I am not responsible for operator error. Every press is different. If you are new or apprehensive, I recommend ordering a couple extra transfers.

Press your transfer with medium-high pressure at 280°F-310°F for 10-12 seconds.

After pressing, you can peel these transfers right away no need to let them cool down, which will increase production by more than 50% lift the transfer from one corner and peel back. This ensures every piece of your design is adhering to your item. If not, stop peeling, lay it back down, and trouble shoot as follows — (1.) If some or all of the design does not transfer when peeling, it means there was not enough heat, pressure, or time. Press your transfer again with more pressure and time first (+5-10 seconds). (2.) If that doesn’t work, try 15°F heat increments until you find the sweet spot. You truly cannot damage the transfer by pressing multiple times.

Place the parchment paper or Teflon sheet over the design and press again for 15 seconds to soften the design, increase durability, and remove shine. If you want a shiny finish, cover with a Teflon sheet for the final press. When washing, flip shirt inside out, wash on cold and dry using low heat or hang.